Free Maker Woodworking Plans & CAD Files • Printable Templates & 3D Models • Zero Mineral Oil
Shop Finishes
Shop Project #06 Desk & Charging Machine: CNC Router Beginner to Intermediate — Single-Setup 2.5D CNC Router Build

Monitor Riser — Woodworking Plan & Build Guide

24" x 9" shelf, 3-7/8" tall. Arched legs leave room for a keyboard or cables underneath. Download the printable PDF plan, vector SVG, layered CAD/CAM DXF, and 3D carving files below—complete with step-by-step build instructions and our 100% plant-and-wax finishing protocol.

Finished Spec 24" x 9" shelf, 3-7/8" tall.
Recommended Stock 3/4" hardwood or plywood, about 24" x 17"
Est. Build Time 1 to 1.5 Hours (plus 15-min finish buff)
Recommended DuraGrain Finish DuraGrain Hardwax Oil (12 fl oz — 0.0 g/L VOC Tung, Walnut & T1 Carnauba)
Monitor Riser Completed Build Finished with DuraGrain
Completed Shop Build • Finished with DuraGrain Hardwax Oil (12 fl oz — 0.0 g/L VOC Tung, Walnut & T1 Carnauba)

Plan & CAD Downloads

Production-ready CAD vectors nested in inches with layer names encoding operation type and exact cut depth.

⇩ Download Standalone Printable Plan PDF
⇩ Primary Cut DXF Layered CAD/CAM vectors ⇩ Blueprint SVG Dimensioned part layout ⇩ Complete Monitor Riser Project Archive (.ZIP) Includes Plan PDF + All Multi-Sheet / Underside DXF & SVG Cut Files
Free to download, print, build (including items you sell), and share—just please do not edit or modify the files and redistribute them.
Section 01 • Cut List, Stock Selection & Tooling

Bill of Materials, Hardwood Species & Shop Tooling for Monitor Riser

Accurate stock preparation is half the battle when building the Monitor Riser. Verify your blank dimensions and thickness before adhering the template or zeroing your CNC/laser axis:

Part Name Qty Stock Thickness Part Bounding Box (W × H)
Top13/4"24" × 9"
Leg23/4"8" × 3-1/2"

Recommended Hardwood & Sheet Stock Selection

For laser-cut finger-joint boxes and desk organizers, use void-free Baltic Birch plywood (B/BB grade) or hardwood-core veneered MDF/plywood, and always measure actual sheet thickness with digital calipers before cutting. For CNC-routed keepsake boxes, valets, trivets, and wall racks, select kiln-dried American Black Walnut, Hard Maple, Cherry, or White Ash planed dead-flat so pocket depths and through-tenon shoulders register with sub-thousandth accuracy.

Required Shop Tools, Blades & Bits

  • CNC router, 1/4" end mill for profiles and dados. Drawn for 3/4" stock with 0.01" dado clearance.
  • Dados are cut into the face you machine; that face becomes the underside.
  • Hold-down clamps, double-sided CNC tape, or brad nails on a leveled spoilboard
  • Flush-trim chisel or oscillating tab cutter + 120, 180, and 220-grit sandpaper
Section 02 • Step-by-Step Shop Workflow

How to Cut, Carve & Assemble the Monitor Riser

Follow this numbered shop sequence to take your Monitor Riser from rough lumber to a crisp, heirloom-grade piece ready for finishing:

Step 01

Measure Actual Stock Thickness & Verify Machine Setup

Before running your machine, measure your actual stock thickness with digital calipers (nominal stock: 3/4" hardwood or plywood, about 24" x 17"). Import the production DXF into VCarve or Fusion 360 in inches with Z-zero set to the material surface, select all vectors, and run Fit Curves to Vectors (0.002″ tolerance) for silky G-code.

Step 02

Machining & assembly stage 1

Cut the two dados 3/8" deep in the top, then profile all three parts with tabs.

Step 03

Machining & assembly stage 2

The dados have rounded ends from the bit. Round the four corners of each leg tenon with a file or sandpaper until it seats.

Step 04

Machining & assembly stage 3

Dry fit, then glue the tenons into the dados. Clamp lightly and check the legs are square.

Step 05

Machining & assembly stage 4

Round over the top edges with a 1/8" roundover bit or sandpaper and finish with DuraGrain Hardwax Oil (0.0 g/L VOC Tung, Walnut & T1 Carnauba finish).

Step 06

Recommended VCarve / CAM Toolpath Sequence

Execute your CNC toolpaths in this exact order to maintain vacuum/tab hold-down rigidity until the final perimeter cut:

  • Pocket, layer POCKET_0.375: cut depth 0.375", 1/4" end mill. Select every vector on the layer together so islands are left standing.
  • Profile, Outside, layer PROFILE_OUTSIDE_0.750: cut depth 0.750" (through), 1/4" end mill, with tabs.

Section 03 • Master Woodworker Notes

Pro Shop Tips & Common Mistakes to Avoid

1. Grain Orientation & Short-Grain Strength

Always orient the long grain of your board strictly parallel to the X-axis (left-to-right on the template). Diagonal grain runout across a narrow utensil neck, hook tenon, or featherboard finger creates short grain that can snap under everyday load.

2. Progressive Sanding (120 → 180 → 220 Grit)

Never skip grits or sand raw hardwood above 220 grit before applying natural polymerizing oils. Over-polishing raw wood to 400+ grit burnishes the wood cells shut and prevents DuraGrain Walnut Oil or Hardwax Oil from anchoring deep inside the fibers.

3. Water-Popping & Wiping Excess Oil Dry

For kitchen utensils and trivets, misting with warm water before your final 220-grit pass eliminates raised-grain fuzz permanently. When applying DuraGrain finishes, always wipe the surface 100% bone-dry after 15–20 minutes so the oil cures inside the wood rather than turns tacky on top.

0.0 g/L VOC Architectural Finish • Includes #0000 Pad & Microfiber Cloth

The DuraGrain Single-Coat Architectural Cure Protocol for Monitor Riser

Whether you cut the Monitor Riser on a CNC router or a CO2/diode laser, spray lacquer and wipe-on polyurethane pool inside finger joints, gum up kerf-cut living hinges, and leave a plastic film that peels or clouds over time. DuraGrain Hardwax Oil bonds molecularly inside the wood grain in a single wipe-on, buff-off application—with 0.0 g/L VOCs and zero toxic fumes in your shop:

Step 01 • Scrub In with #0000 White Pad

Apply Thinly with the Included 3"×4.5" #0000 Non-Abrasive Pad

Sand all surfaces to 180–220 grit (cleaning any laser char from finger tabs if applicable) and vacuum away dust. Pour a small ribbon of DuraGrain Hardwax Oil (12 fl oz) and work it evenly into the wood using the included 3"×4.5" #0000 white non-abrasive palm pad. The pad shears the Pure Chinawood Tung Oil, Refined Walnut Oil, and T1 Carnauba Wax deep into end-grain pockets, dados, and miters without runs or sags.

Step 02 • 15-Minute Buff-Off

Buff Bone-Dry with the Included Dark Charcoal Microfiber Cloth

Allow the oil-wax blend to penetrate for 15 minutes, then buff the entire piece completely dry using the included 12"×12" 300 GSM edgeless dark charcoal microfiber buffing cloth. Because our formula cures by oxidative cross-linking rather than solvent evaporation, it leaves a dead-flat, velvet-matte tactile finish that highlights natural walnut, maple, cherry, or Baltic birch figure and spot-repairs effortlessly.

DuraGrain Hardwax Oil 12 fl oz Kit with Pad and Microfiber Cloth
Complete Kit • Includes #0000 White Pad + Charcoal Microfiber Cloth

DuraGrain Hardwax Oil (12 fl oz)

0.0 g/L VOC Pure Tung Oil, Alkali-Refined Walnut Oil, T1 Brazilian Carnauba & USA Beeswax architectural finish. Formulated & poured in Pittsburgh, PA.

$34.99 Shop Hardwax Oil Kit →
DuraGrain 10-Pack #0000 Non-Abrasive White Applicator Pads
Shop Refill • 3"×4.5" Non-Woven Applicator Pads

10-Pack #0000 White Applicator Pads

Keep extra shop-grade #0000 non-abrasive white pads on your bench for CNC pockets, boxes, and furniture builds—zero steel-wool rust specks.

$9.99 Shop 10-Pack Pads →
Explore More Maker Plans

More Desk & Charging Woodworking Plans